![behringer mx8000 power supply behringer mx8000 power supply](https://reconingspeakers.com/wp-content/uploads/2020/03/32101-1-1536x1152.jpg)
All of a sudden I had sound on the dead channels! After that I tested all channels and found a few channels across the board that are too soft or somehow glitchy patchwise. I followed this by unplugging the power connector where it goes into channel 17-24 board and sprayed deoxit, then replugged it. Then I proceeded to pull off the ribbon cables that connect the channel boards and jack boards, and deoxit sprayed the connectors. There was a nasty old dead bee underneath the plug, I scraped it out. I thought that would cure it, but it did not. Then I noticed the power connector that goes to the dead board was unplugged, where the power comes into the board. Med meterbro + 900,- Additional 24 input Mix-B channels, each with individual 2-band EQ, Gain, Pan and Mute Dedicated 4-band EQ with 2 semi-parametric Mid bands. Stærkeste tyske kvalitet til studiet, øvelokale eller scene. When I wiggled the middle ribbon cable at first, the red and green lights would go on and off intermittantly, but after I sprayed the connectors they stayed lit, still no sound. Behringer MIXER MX 8000 48/24 channel Mixer,, Behringer MX8000, Alt virker perfekt, har været anvendt i studie. Obviously, confirm you have this correct model mixer prior. When being driven hard, many desks begin to show signs of stress due to power supply limitations. In common with most desks of this size, the EURODESK has several hundreds of line level operational amplifiers (op-amps) inside. It has a fair amount of cosmetic wear, as shown in the pics, but worked fine when taken out of service in his studio. 2.3 Power Supply Unit (PSU) Any amplifier circuit is limited in its transient response by the available current. This was a backup power supply for someone we work with regularly. Then I sprayed deoxit on all the connectors. This is the 400 watt POWER SUPPLY for the Behringer Eurodesk MX-8000 studio mixer. So I started with the ribbon cables attached to the channel 17-24 board, cut the glue off the connectors, and pried them off.
#BEHRINGER MX8000 POWER SUPPLY CRACKED#
So tonight I cracked it open, expecting to see a loose ribbon cable. Since then I have fixed countless synths and samplers.Īll the while been thinking about the dead 8 channels on the mx 8000, and doing more research the last week.
![behringer mx8000 power supply behringer mx8000 power supply](https://img.letgo.com/images/98/04/b4/73/9804b473753a1e0d7b650eb0695c731c.jpeg)
In the meantime, I completed my next project, and brought an emu emax II back from dead.
![behringer mx8000 power supply behringer mx8000 power supply](https://never.net/powersupply/2496ps1.jpg)
#BEHRINGER MX8000 POWER SUPPLY HOW TO#
I didnt even know how to use a voltmeter, but eventually I did get the psu to work! After that channels 1-16 seemed to work for the most part, but 17-24 werre dead, giving the red and green lights of death across those 8 channels. It took me a couple of months, being a complete novice, to rebuild the power supply. I thought I would teach myself electronics repair, and this was one of my first projects. I bought one of these dead for 80$ a few years ago.